The use of ultra-high-temperature sintering furnace operation matters
Release time:
2025-02-27
Author:
Source:
Abstract
Ultra-high-temperature sintering furnace adopts special high-performance industrial microwave source, which can ensure the long-term continuous and stable operation of the equipment. It is suitable for calcining, roasting, sintering, high-temperature synthesis, ashing, melting and heat treatment research of various solid materials under various air atmospheres. The high-temperature sintering furnace has the advantages of balanced temperature field, low surface temperature, fast temperature rise and fall, and energy saving. The installation site should meet the vacuum health requirements, clean and dry air around, well ventilated, the site is not easy to raise dust and so on.
1、Winter should pay attention to the warmth of the circulating water, otherwise it is easy to water pipe burst.
2, before operation should be done to clean the observation window glass, clean the inner wall of the furnace, observe the water pressure, observe the furnace graphite whether there is any damage, power on and observe whether the meter display is normal, test the hydraulic system can work normally.
3, because of the complexity of the sintering furnace equipment, it is recommended that the use of specialists, specialists responsible for the strict implementation of the use of novice training before, after the use of the inspection, the operation of the use of records and other equipment to use the provisions.
4, can also be used as a vacuum sintering furnace, used in vacuum sintering furnace, pay attention to the crucible placed in the furnace, do not forget to cover the small cover between them after covering the insulation screen cover. Otherwise, it is easy to burn the furnace.
5, ultra-high-temperature sintering furnace should be used after the furnace body to maintain a vacuum, because the furnace insulation layer is susceptible to moisture, keep the vacuum so that the next vacuum will be faster.
6, useful thermocouple heating process, pay attention to the temperature deviation from the infrared than the infrared, such as the temperature difference is large, you should use the infrared sight to observe the infrared instrument is aligned.
7, the operation of the furnace cover, furnace, furnace, furnace bottom, electrodes, upper and lower pressure head and other parts of the operation should be frequently contacted by hand to prevent the water temperature is too high to damage the seal.
8, one year after the use of the instrument should be sent to the measurement department for calibration.
Recommended Reading
2022-07-28
Zhuzhou Chi Carbon Automation Equipment Co., Ltd
1
Email:13077017815@163.com
chitanauto@163.com
Adresse:
Room 201-2, 2nd Floor, Jixiang Complex Building, Liyu Industrial Park, Tianyuan District, Zhuzhou City, Hunan Province
Mr. Gong +86 13975355803
